The best 3D printers in 2020 for beginners and budget creators – CNET

This story is part of Holiday Gift Guide 2019, your source for the season’s best gifts and deals, hand-picked by the experts at CNET.

3D printing, like virtual reality, is one of those technology things that always seems to be on the cusp of going mainstream — without ever quite crossing over. Even though we’ve seen the concept play out for years on TV and in movies (what do you think a Star Trek replicator is doing?), having a 3D printer at home is still considered wildly exotic outside a small enthusiast audience.

Last year, I started playing around with 3D printing, less commonly known as additive manufacturing, mostly to satisfy my own curiosity, with an unexpected result. I’m now completely addicted to 3D printing. Over the past several months, I’ve searched for the best 3D printer technology and tested several 3D printing models, from rock-bottom Monoprice printers to step-up resin printers that produce a truly professional-level print for prototyping.

Below are printers in the lower-cost price range. We tested these 3D printers in the CNET Labs and compare the close-ups of one of our test prints, a bust of Abraham Lincoln. All 3D prints require a little smoothing and filing with a hobby file to look their best (you can also prime and paint each print, fill gaps with filler compound and so on) — but the Abes presented below are right off the print bed, no touch-ups after the printing.

One printer I have not tested yet, but hear a lot of good feedback about, is the Creality Ender 3, which currently costs an affordable $230 and has a large community of dedicated fans who claim it’s the best 3D printer. Just note that some more assembly is required than with these other printers.

For what to print and how to start printing, including materials (e.g., polylactic acid vs. ABS plastic), printing technology and software, see my latest tips and advice for 3D printing. Note that CNET may get a share of revenue from the sale of products featured on this page.

Sarah Tew/CNET

Despite the low price, this is a pretty damn full-featured 3D printer, and a favorite affordable first step for testing the 3D print maker waters. Monoprice also sells a slightly less expensive, affordable entry-level design, called the Mini Delta (and the Monoprice Maker, which offers more volume), but this is superior for printing in just about every way — and it’s often on sale for $199, or even a little less.

But it’s also a good deal harder to set up and use than some of the more expensive printing models. One of the cons is that the print surface is exposed, so your printing is more vulnerable to the elements (or cats, or children), and it took much tweaking, calibrating and troubleshooting to get good print quality results. Despite the beginner price, it’s not as beginner-friendly for printing as I’d like it to be. That said, it does come with a preloaded SD card, and we printed some very nice prints from it, eventually.

Read more: The best VR headsets for 2020


Abe, in a solid print considering the low price of the Monoprice V2. 

Sarah Tew/CNET

Sarah Tew/CNET

This is my go-to printer for balancing price, ease of use and print quality. Flashforge is the manufacturer, and sells this as the Adventurer 3, while the Monoprice Voxel version is the same hardware, just sold under a different name (the Voxel screen even says “Adventurer 3” when you turn it on). It’s not the fanciest of 3D printing, but it has a fully enclosed print area, a touchscreen interface and a flexible heated print bed that lets you pop off quality prints with ease.

The most important thing about this pair of printers (and I tested both versions) is that the setup was easy, and I was up and printing in less than 30 minutes after opening the box and gathering materials. I did find the Wi-Fi connection on this 3D print maker could be finicky at times, but at least there’s a USB port right on the front panel for importing your files to the machine via thumb drive. My other complaint — the enclosed filament housing only takes half-size 0.5 kg rolls, not the more common 1 kg rolls.

See the Monoprice version here.

Read more: Best TVs for gaming with low input lag


Abe, very good, a little softer on the details, from the Adventurer 3. 

CNET/Lori Grunin

Sarah Tew/CNET

The Inventor II is a step-up in quality from the Adventurer/Voxel, even though this 3D print maker is roughly the same size and close to the same build volume. The larger color touchscreen is a huge improvement, making it much easier to tap in Wi-Fi passwords before printing. The enclosed space means 3D printing will pause automatically if someone opens the door, and the removable heated print bed is hefty, with a clever flexible top surface that peels off magnetically.

The manufacturing speed was a little faster than the Adventurer’s speed, with more calibration and fine-tuning options for 3D printing. But despite the faster printing speed, it also gets the same knock, an enclosed filament housing that only fits smaller 0.5 kg spools, which are less economical and harder to find. In our Abe Lincoln test, it printed the cleanest, most detailed print quality of the filament-based printers with a resolution of 50 to 400 microns.

Read more: Best gaming chairs we’ve sat in for 2020


Abe, looking sharp from the Inventor II. 

Sarah Tew/CNET

Sarah Tew/CNET

No matter how fine, most 3D prints are still just a plastic design layered one drop at a time. That means layer lines when printing, surface imperfections and a look that’s not as clean as professionally molded plastic. Resin printers are the next step up in rapid protoyping design technology when you want your print to look as high quality as anything assembled in a factory. Instead of 3D printing your object with a hot nozzle with high temperatures depositing bits of plastic filament, resin printers use UV light to cure liquid resin, one paper-thin layer at a time, on an upside down print bed that rises at a slow speed from a vat of semitoxic slime. 

Yes, it’s as unpleasant as it sounds. The resin smells bad and requires rubber gloves to handle (and a well-ventilated room for printing). You’ll also need isopropyl alcohol to wash the prints after they come out, and a UV lamp to finish the curing process. It’s a lot of work and mess. But the printed model we got from the Anycubic Photon was simply amazing and the best 3D printer for sharp details. (Resolution is 25-100 microns.) Cured resin feels almost like glass, and holds quality design detail. The print quality from the printing process is astounding — just be prepared for what you’re getting into when printing. 

Read more: Best gaming keyboards under $100 for 2020


Abe, stunning in a green resin from the Photon. 

Sarah Tew/CNET

Originally published earlier this year.

All copyrights for this article are reserved to CNET

Leave a Reply

Your email address will not be published. Required fields are marked *